Using Ignite on a Trusted System

[Daniel M. Gonzales]

We have a single HPUX 11.0 server that we use as our primary Ignite server. Our security department is now telling us we need to convert the server to a Trusted System. Does anyone know if this will cause problems or difficulties for Ignite? Thanks.

[Uday_S_Ankolekar]

Hi,

Nope...

[Patrick Wallek]

Should be no problems for ignite with a trusted server. Everything should behave normally.

[Roger Baptiste]

Hi,

No problems. All our systems are trusted and ignite works fine on them.

-raj

[Michael Tully · Accepted solution]

Hi,

I have an 'A' class server that is our ignite server. We have built systems before it was trusted and after we have set it as trusted. There is no problem whatsoever.

-Michael

[Sanjay_6]

hi Daniel,

As the others have already suggested, you should not face any problem with the system being in trusted mode.

Here is the ignite faq,

http://www.software.hp.com/products/IUX/faq.html

hope this helps.

Regds

[Craig Rants]

I agree, you should have no problems.

Good Luck,
C

[Daniel M. Gonzales]

Thanks guys. These were just the types of answers I was looking for...I was looking to build a consensus.

[Duncan Edmonstone]

Make sure you get the latest release of Ignite... some of the old versions did have issues with trusted systems which only show up during recovery.

HTH

Duncan