backup and ignite

[Manal hassan]

hello all,

I have hpux server 11.23 U 9000/800 and i didn't know how can i tack a backup and ignite so
i want to help.
if you can give me any bdf or document contain all steps from a to z and also after that how can i check if the backup & ignite succeeded or not.
thank you

Manal

[James R. Ferguson]

Hi:

See:

http://www.hp.com/go/ignite-ux-docs

Regards!

...JRF...

[Bijeesh]

hi,
First check ignite is installed in your system or not.
#swlist -l product | grep -i ignite

For taking backup on tape,
# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn

There is a lot of options you can use.See the below link.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01942571/c01942571.pdf

[S.N.S]

Hi,

Follow the steps given in the link - it's pretty straight forward.

Folks, correct me if I am wrong : I don't believe you can take ignite backup to a DVD - and DVD Capacity would not be enough for the vg00

HTH
SNS
NB:Points to all helpful :-)!

[Manal hassan]

hi,
you are right
you can not take ignite backup to a DVD - and DVD Capacity would not be enough for the vg00

[Pulse001]

Hi Manal,

Please go thru the attached docs.