Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

error installing ignite-ux

SOLVED
Go to solution
meekrob
Super Advisor

error installing ignite-ux

Hi All,

 

when installing ignite-ux-11-11 on hp-ux 11iv1 im getting the installation is being suspended with the following error:

 

ERROR:          Couldnotaccessremotefile"/opt/ignite/binia/auto_adm"in
      software item                                           
"Ignite-UX.MGMT-TOOLS,r=C.7.15.254,a=HP-UX_B.11.11_32/64,v=HP,fr
due to an internal error on the remote system.                  
ERROR:         Failed installig fileset "Ignite-UX.MGMT-TOOLS,r=C.7.15.254".                          
*Retrynumber 1 of 1 for loaing files for fileset
 

Any suggestion plz?

        

Thanks in advance

6 REPLIES
Torsten.
Acclaimed Contributor

Re: error installing ignite-ux

this can happen if you transfer the file via ftp in ascii mode - did you?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
meekrob
Super Advisor

Re: error installing ignite-ux

Hello,

 

 im sure that ive transfered the downloaded depot file using ftp (binary mode).

May be it is an 11iv1 related issue however, im sure of the downloaded package below:

HP-UX_11i_v1_Ignite-UX-11.11_C.7.15.254_HP-UX_B.11.00_32_64

 

Regards

Dennis Handly
Acclaimed Contributor

Re: error installing ignite-ux

> I'm sure that I've transferred the downloaded depot file using ftp (binary mode).

 

Does the checksum match?

Also, you may have to restart swagentd: swagentd -r

meekrob
Super Advisor

Re: error installing ignite-ux

Hello, could you please enlighten me on how to verify if that the checksum match?

 

Regards

Dennis Handly
Acclaimed Contributor
Solution

Re: error installing ignite-ux

>how to verify if that the checksum match?

 

When you download a patch or bundle, it should provide the md5sum or cksum values.

Then you run one of these tools and compare.

 

In particular if you are downloading PHCO_41529:

11.31 libc cumulative patch

MD5: babc01e86cd2726f6eef989c7ab46cf2

Checksum: 4065175730 20391609

SHA-256: baa243e5217840e6a584e68755d4c63a6bca871ab631199fdc4722fe4bb445c6

 

$ md5sum PHCO_41529
babc01e86cd2726f6eef989c7ab46cf2  PHCO_41529
$ cksum  PHCO_41529
4065175730 20391609 PHCO_41529
$ openssl dgst -sha256 PHCO_41529
SHA256(PHCO_41529)= baa243e5217840e6a584e68755d4c63a6bca871ab631199fdc4722fe4bb445c6

Highlighted
meekrob
Super Advisor

Re: error installing ignite-ux

Many Thanks

Thread considered closed