ignite-UX boot problem

[Mustafa Gulercan]

hi;
i've made a tape recovery with following;

make_tape_recovery -a /dev/rmt/0mn -l -v -x inc_entire=vg00

then i've cloned a system with this tape.everything was fine.
But when i try to clone a second server it couldn't find the bootable tape after interrupted the process of the loading.

Both the servers are the same.

what should i do ?

thanks for reply's

[Steven E. Protter]

Shalom,

ioscan -fnC tape

On the server that is giving issues.

There may be a problem with the tape drive, or stape driver may need to be in the kernel.

In the boot process
interupt at the 10 second prompt
sea


If you see no sequential device, your tape drive is invisible. I'd put in a hardware call to HP.

SEP

[Sivakumar TS]

Hi,

You can also search for bootable devices by typing

sea ipl

we should get the sequential access media listed, if the tape and the drive is OK

Regards,

Siva.

[Mustafa Gulercan]

selam;

after ioscan -fnCtape i see the drivers.
but i can not find sequential access media after >sea command.

then i plugin a terminator to the tape device.system can now find the bootable tape device.

thanks;
mustafa