1748104 Members
4418 Online
108758 Solutions
New Discussion

Re: ignite adding client

 
Aamir14
Regular Advisor

ignite adding client

hi,

I installed new IGNITE

 

 

# swlist -l product|grep -i ignite
  Ignite-UX             C.7.7.93       HP-UX System Installation Services
# swlist -l depot | grep -i recover
  /var/opt/ignite/depots/recovery_cmds
#
 

When i install new clients its generating error messages:-------

 

ERROR swinstall failed to install recovery tools from:

"billdev1:/var/opt/ignite/depots/recovery_cmds

 

this is my server nfs entry

# more /etc/dfs/dfstab
#       place share(1M) commands here for automatic execution
#       on entering init state 3.
#
#       share [-F fstype] [ -o options] [-d "<text>"] <pathname>
#       .e.g,
#       share  -F nfs  -o rw=engineering  -d "home dirs"  /home
share -F nfs -o anon=2 /var/opt/ignite/clients
share -F nfs -o anon=2  /var/opt/ignite/depots/recovery_cmds
share -F nfs -o anon=2 /var/opt/ignite/clients/appsdev2
#
 

Please suggest me ..................

 

 

thanks

aamir

 

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: ignite adding client

You should install the Installation Utilities too, looks like this:

 

  Ignite-UX-11-11       C.7.5.142      HP-UX Installation Utilities for Installing 11.11 Systems
  Ignite-UX-11-23       C.7.5.142      HP-UX Installation Utilities for Installing 11.23 Systems
  Ignite-UX-11-31       C.7.5.142      HP-UX Installation Utilities for Installing 11.31 Systems


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: ignite adding client

Hi,

 

 

I already installed older version 

 

│            Ignite-UX-11-11  ->   C.7.7.93        HP-UX Installation Utili │ │
││            Ignite-UX-11-23  ->   C.7.7.93        HP-UX Installation Utili │ │
││            Ignite-UX-11-31  ->   C.7.7.93        HP-UX Installation Utili
 
but still same error
 
thanks
aamir
Aamir14
Regular Advisor

Re: ignite adding client

Hi,

 

I installed ignite an new server

i added two clents both clients are successsfully installed 

 

but i also add four new clients .but they are not installed properly 

its shown ERROR messages 

for example:-----

ERROR

rcmd_af: connect: prodpyrl.mpmkvvcl.com connection refused

 

 

second error:---

 

Warning: untrusted X11 forwarding setup failed: xauth key data not
generatedwarning: no xauth data&colon; using fake authentication data for
X11 forwarding.mnr_UI Couldn't bring the initial window. This may
occur when you specify an incorrect display.ERROR:   The interactive
UI failed to start. Check your terminal type.

 

I already x11 allow on sshd config file:------

 

     X11Forwarding yes
 
X11DisplayOffset 10
KerberosAuthentication yes
Protocol 2,1
 
this is my ssh and ignite version:-----
 
# swlist | grep -i secureshell
  SecureShell                   A.06.20.006    HP-UX Secure Shell
# swlist -l product|grep -i ignite
  Ignite-UX             C.7.11.444     HP-UX System Installation Services
 
 
Server and Clients are same ignite version and enabled X11 forfarding.
 
Please suggest me what is  a actual problem...
 
Thanks
Aamir 
 
 
 
 

 

 

Aamir14
Regular Advisor

Re: ignite adding client

Hi,

 

Also Kindly see the IGNITE logs....

 

WARNING: Client uatdata1 is waiting for installation.  Since the server started
         checking, the client's logfile has not been updated in 45 minutes.
         The timeout in effect is 20 minutes.
 
WARNING: Client prodata1 is waiting for installation.  Since the server started
         checking, the client's logfile has not been updated in 45 minutes.
         The timeout in effect is 20 minutes.
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
 
=======  11/05/13 17:34:17 IST  End HP-UX Install Server
 
 
 
 
=======  11/06/13 14:50:20 IST  Begin HP-UX Install Server
         @(#)ignite/ignite user interface (opt) Revision:
         /branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23
         02:35:40 -0600 (Fri, 23 Jul 2010)
 
 
 
=======  11/06/13 14:50:27 IST  Begin HP-UX Install Server
         @(#)ignite/ignite user interface (opt) Revision:
         /branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23
         02:35:40 -0600 (Fri, 23 Jul 2010)
 
 
 
=======  11/06/13 17:50:46 IST  Begin HP-UX Install Server
         @(#)ignite/ignite user interface (opt) Revision:
         /branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23
         02:35:40 -0600 (Fri, 23 Jul 2010)
 
 
Program completed successfully.
       * The system recovery archive for "uatdata2" is "Complete".
 
       * The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
 
=======  11/06/13 18:05:44 IST  End HP-UX Install Server
 
 
 
 
=======  11/07/13 11:12:52 IST  Begin HP-UX Install Server
         @(#)ignite/ignite user interface (opt) Revision:
         /branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23
         02:35:40 -0600 (Fri, 23 Jul 2010)
 
 
Program completed successfully.
       * The system recovery archive for "uatdata2" is "Complete".
 
       * The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".
 
ERROR:   rcmd_af: connect: prodpyrl.mpmkvvcl.com: Connection refused
 
WARNING: Client uatdata1 is waiting for installation.  Since the server started
         checking, the client's logfile has not been updated in 20 minutes.
         The timeout in effect is 20 minutes.
 
WARNING: Client prodata1 is waiting for installation.  Since the server started
         checking, the client's logfile has not been updated in 79 minutes.
         The timeout in effect is 20 minutes.
 
WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not
         generatedWarning: No xauth data; using fake authentication data for
         X11 forwarding.       * Boot device is:
         0/6/0/0/0/0/4/0/0/0.0x0.0x4000000000000000
 
WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not
         generatedWarning: No xauth data; using fake authentication data for
         X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may
         occur whenyou specify an incorrect display.ERROR:   The interactive UI
         failed to start.  Check your terminal type.
 
 
=======  11/07/13 12:55:44 IST  End HP-UX Install Server
 
 
 
 
=======  11/07/13 12:55:47 IST  Begin HP-UX Install Server
         @(#)ignite/ignite user interface (opt) Revision:
         /branches/IUX_RA1009/ignite/src@81712 Last Modified: 2010-07-23
         02:35:40 -0600 (Fri, 23 Jul 2010)
 
 
Program completed successfully.
       * The system recovery archive for "uatdata2" is "Complete".
 
       * The system recovery archive for "appsdev2.mpmkvvcl.com" is "Complete".
 
WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not
         generatedWarning: No xauth data; using fake authentication data for
         X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may
         occur whenyou specify an incorrect display.ERROR:   The interactive UI
         failed to start.  Check your terminal type.
 
WARNING: Warning: untrusted X11 forwarding setup failed: xauth key data not
         generatedWarning: No xauth data; using fake authentication data for
         X11 forwarding.mnr_ui: Couldn't bring up the initial window. This may
         occur whenyou specify an incorrect display.ERROR:   The interactive UI
         failed to start.  Check your terminal type.
 

Thnaks

Aamir

pradeep m
Respected Contributor

Re: ignite adding client

ERROR

> rcmd_af: connect: prodpyrl.mpmkvvcl.com connection refused

 

For the above error message, check the below in the clients with issues

+ Make sure the login and shell are uncommented.

/etc/inetd.conf  

login        stream tcp6 nowait root /usr/lbin/rlogind  rlogind 
shell        stream tcp6 nowait root /usr/lbin/remshd   remshd 

/etc/services 
# grep login /etc/services    
login        513/tcp                 # remote login   

Port 513 needs to be enabled.

 

If any changes to /etc/inetd.conf are made inetd -c needs to be run for the changes to take effect.

 

Regards,
Pradeep

I am an HP Employee
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details