ignite

 
SOLVED
Go to solution
rajesh73
Super Advisor

ignite

hi,

 

i plan to install the ignite latest depot file in hp-ux 11.31

 

HP-UX_11i_v3_Ignite-UX-11.31_C.7.18.63_HP-UX_B.11.00_32_64.depot

 

 

questions

*********

 

1.i installed the latest deport file in one source server, i need to push the latest depot file to destination server. we have the command but we dont know how to use

 

#/opt/ignite/bin/ignite

 

2.how to check the depot file require reboot or not.

2 REPLIES 2
Dennis Handly
Acclaimed Contributor
Solution

Re: ignite

>2.how to check the depot file require reboot or not.

 

See this swlist command:

http://h30499.www3.hp.com/t5/Patches/Command-to-check-whether-a-patch-requires-reboot-or-not/m-p/5116907#M12942

GregSB
Occasional Advisor

Re: ignite

The Ignite-UX product itself does not require a reboot. 

 

If you have the desired version of Ignite-UX already installed on a server, this server can then be used as the swinstall source to upgrade other servers as follows.

 

Create the depot on the "installed" server using the pkg_rec_depot command.

myserver1# /opt/ignite/lbin/pkg_rec_depot

 

pkg_rec_depot is nice in that it creates a depot using currently installed files, so the disk space required for the depot is much less.  See the pkg_rec_depot manpage for additional info. 

 

 

Once the depot has been created on the source you can upgrade other servers.

myserver2:  swinstall -s myserver1:/var/opt/ignite/depots/recovery_cmds Ignite-UX

 

After installation use "swlist -l fileset Ignite-UX" to verify the new version and that all filesets are at the same revision.

I work for HPE
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details