lan Ignite Restore on L3000

[Thomas Murphy]

When I boot off the lan I get an error message about if your terminal is not set to "hp" you will see garbage. Change the terminal type in your GSP if possible.

Well I am using putty and it does not have an option for HP. How do I change the terminal type in the GSP for an L3000? Is it possible?

Does anyone know what tool to connect to the LAN port that has "HP" as a terminal option?

[Steven E. Protter]

Shalom,

Need to know the OS. 11.00's ignite interface worked with hp terminal. 11.11's worked with EM100 from a serial console.

You may wish to try vt100 as your terminal type.

I'm not aware of a terminal type called GSP.

SEP

[Thomas Murphy]

Can the GSP (gaurdian service processor) change the terminal setting for the LAN console? The point is not to use a serial console. I need to be to telnet to the LAN console remotely.

[Yang Qin_1]

You cannot change LAN console terminal setting via GSP. You can download Reflection for HP (not for Unix) from WRQ web site
http://www.wrq.com/servlets/com.WRQ.LC.LoadSource?source=CD-GEN&temp=evaltype
Reflection for HP is exactly what you need. If you have a X-window available, try hpterm. It will work as well.

Yang

[Thomas Murphy]

I found it - It has been awhile since I worked on a L3000.

In the GSP select CA and change the terminal settings to use vt100 instead of hp

Thanks.

[Thomas Murphy]

You can change terminal setting in the GSP.
You need to use the CA option.