lan ignite boot rp7410

[Pradep]

Hi Friends,
I have rp7410 hpux 11.11. IG-UX B5725AA.
npar1 is installed using DVD and made Ignite server. Now trying to boot npar2 from this ignite server. but it gives below error.

how can i correct it ?

Boot
: lan(0/0/8/0/0/4/0;0)/boot/Rel_B.11.11/WINSTALL
lan(0/0/8/0/0/4/0;0)/boot/Rel_B.11.11/WINSTALL: cannot open, or not executable
1. target OS is B.11.00
2. target OS is B.11.11
3. target OS is B.11.23 PA
4. Exit

Choose Operating System to Install :

[johnsonpk]

Hi Pradep,

can you verified the permissions for the below directories/files ?

/opt/ignite/boot/Rel_B.11.11
/opt/ignite/boot/Rel_B.11.11/WINSTALL
/opt/ignite/data

all should have a read+execute permission

Thanks!!
Johnson

[johnsonpk]

Hi Pradep,

can you verify the permissions for the below directories/files ?

/opt/ignite/boot/Rel_B.11.11
/opt/ignite/boot/Rel_B.11.11/WINSTALL
/opt/ignite/data

all should have a read+execute permission

Thanks!!
Johnson

[Pradep]

Hi Johnson,
Permissions are correct.
what to check next ?
i guess it has to some patch/bug/rp7410 supportabilty as lanboot/ignite server.
As i have followed all steps to create and boot from ignite server.
Thanks.

[Shailendran V Naidu]

Hi Pradep,

Need the following:
1) swlist -l product | grep -i ignite

2) ll /opt/ignite/boot/Rel_B.11.11

3) more /etc/inetd.conf | grep tftp
(make sure /opt/ignite and /var/opt/ignite are mentioned under tftp in this file)

[Pradep]

# swlist -l product | grep -i ignite
Ignite-UX C.6.10.97 HP-UX System Installation Services
#
# ll /opt/ignite/boot/Rel_B.11.11
total 144064
-rwxr-xr-x 1 bin bin 15985032 Sep 29 2006 INSTALL
-rwxr-xr-x 1 bin bin 15728640 May 24 12:32 INSTALLFS
-rwxr-xr-x 1 bin bin 19409416 Sep 29 2006 VINSTALL
lrwxr-xr-x 1 bin bin 9 May 24 12:31 VINSTALLFS -> INSTALLFS
-rwxr-xr-x 1 bin bin 22616784 Sep 29 2006 WINSTALL
lrwxr-xr-x 1 bin bin 9 May 24 12:31 WINSTALLFS -> INSTALLFS
-rwxr-xr-x 1 bin bin 90 Sep 29 2006 auto_conf_pa

# grep tftp /etc/inetd.conf
tftp dgram udp wait root /usr/lbin/tftpd tftpd\
/opt/ignite\
/var/opt/ignite
instl_boots dgram udp wait root /opt/ignite/lbin/instl_bootd instl_bootd
#

[Steven E. Protter]

Shalom,

Check that the DHCP server built into Ignite is running (ps -ef grep boot) and has available IP addresses.

This looks like a simple network connectivity issue.

SEP

[Shailendran V Naidu]

Are you getting to the stage where it has aquired an IP address from the server ?

If not, make sure the servers are in the same subnet.

Also check if you have added the bootable IP address in the instl_boottab file.



If it is able to obtain an IP address then it may be a firewall issue.

[Pradep]

Yes, it boots and get IP address..after that nothing happens. and choice comes to select image.

[sujit kumar singh]

Hi


when you are prompted to choose an Image, what happens after that?

Installing IG-UX Installation utilities means you have made the sevrer capble of installing OS over network.

Have you a valid system image from where the server shall install another server.

you can see by creating a golden image on the ignite server and see by using that for install.

you can start from here.

http://docs.hp.com/en/5992-5309/ch11.html?btnPrev=%AB%A0prev

regards
sujit