Ignite-UX

make net recovery fails. Firewall issue

 
SOLVED
Go to solution
rico_cebiche
Advisor

make net recovery fails. Firewall issue

I was trying make_net_recovery to work but it fails. I understand that I should open a Cisco PIX firewall ports to connect the client to Ignite server in other network domain.
I will appreciate if somebody provides a list of firewall ports to be opened, tcp/udp, and if they are bi-directional.
5 REPLIES 5
Steven E. Protter
Exalted Contributor

Re: make net recovery fails. Firewall issue

Shalom,

You need to open up 2049 and the rest of NFS.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sameer_Nirmal
Honored Contributor
Solution

Re: make net recovery fails. Firewall issue

Refer the document at
http://docs.hp.com/en/5991-0734/5991-0734.pdf for the information about network ports used by Ignite-UX.


rico_cebiche
Advisor

Re: make net recovery fails. Firewall issue

I opened port 2049 nfsd to ignite server, I tested and I can mount remote nfs exports, but seems that there are some other ports needed. I am receiving next error message:
* Checking Versions of Recovery Tools
ERROR: Cannot retrieve Ignite-UX version from server "ignite".
I checked bastille document mentioned, but it seems there are several ports not needed for make_net_recovery, so what are the essential ports to be opened in the PIX firewall ?
Sameer_Nirmal
Honored Contributor

Re: make net recovery fails. Firewall issue

Try with following ports

tftp 69
instl_boots 1067
instl_bootc 1068
nfs 1110, 2049
bootpc 68
bootps 67
ftp 21
rico_cebiche
Advisor

Re: make net recovery fails. Firewall issue

Bastille document shows which ports are needed.