Ignite-UX

make recovery and print_manifest

 
Philip J. Priest_1
Frequent Advisor

make recovery and print_manifest

When running make_tape_recovery & print_manifest on my rp7400 server i have the following error:

WARNING: Cannot find device file: 18
WARNING: Cannot find device file: 8
WARNING: Cannot find device file: 17

Is this a minor error or something i should be concerned about?

thanks!
Phil
3 REPLIES 3
Pete Randall
Outstanding Contributor

Re: make recovery and print_manifest

Phil,

Try running "insf -e" and then re-run your print_manifest to see if you get the same errors. They should be minor but it would be nice if this fixes them.


Pete

Pete
Sridhar Bhaskarla
Honored Contributor

Re: make recovery and print_manifest

Hi Phil,

Pete got it. Run 'ioscan -fnkC disk' and make sure you have the device files associated with each disk path shown in there.

Try 'insf' and see if new device files are created. If not, you can run insf -e -H to create only those device files.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Philip J. Priest_1
Frequent Advisor

Re: make recovery and print_manifest

Pete, thanks alot. The insf -e did it! Must have been some strange device file.

And i did another make_tape_recovery no errors!

Phil