Ignite-UX
Showing results for 
Search instead for 
Do you mean 

make_recovery says: could not parse volume group name

SOLVED
Go to Solution
Respected Contributor [Founder]

make_recovery says: could not parse volume group name

I try to make a recovery tape. make_recovery says: could not parse volume group name.

vgdisplay and vgscan -pv give me normal (expected) output though.

the ignite log files says:

Started - Thu Dec 7 13:34:55 2000
********
make_recovery -v -i-d /dev/rmt/c1t0d0BESTn
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d

********
Ended Unsuccessfully - Thu Dec 7 13:34:57 2000

My systems are 100% Murphy Compliant. Guaranteed!!!
4 REPLIES
Honored Contributor [Founder]

Re: make_recovery says: could not parse volume group name

Run vgscan to recreate /etc/lvmtab,
do make_recovery -ACv -d /dev/rmt/c1t0d0BESTn
When We Seek To Discover The Best In Others, We Somehow Bring Out The Best In Ourselves.
Respected Contributor [Founder]

Re: make_recovery says: could not parse volume group name

did do that Cris, but no change in the output.
My systems are 100% Murphy Compliant. Guaranteed!!!
Frequent Advisor

Re: make_recovery says: could not parse volume group name

The make_recovery command has some problems with certain disk configurations. Try to install patch PHSS_21827, which is a new make_recovery. (this patch applies to 10.x)

This might solve your problem.

You can download the patch from the itrc website, and the size is 101K.

Kind regards,

Marcel Eken.
Honored Contributor [Founder]

Re: make_recovery says: could not parse volume group name

Hi Donald,

This is a known issue, solved by patch PHSS_21828 (for HP-UX 11.0).
The error message you have is in the patch release notes

http://europe-support2.external.hp.com/wpsl/bin/doc.pl/screen=wpslDisplayPatch/sid=c92420b21592d402cc

Best regards,

Dan
Everybody knows at least one thing worth sharing -- mailto:dan.hetzel@wildcroft.com