Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

make_tape_recovery took long time to complete (more than 6 hours)

admamir
Occasional Contributor

make_tape_recovery took long time to complete (more than 6 hours)

Hi gurus,

I've a problem with  RP7410 which running 3 GB memory and 4 x 750 MHz, PA-RISC on client site. On 1st April 2013, they ran make_tape_recovery but it seems took such a long time to complete (more than 7 hours). Before this it took only 2-3 hours to complete. The first finding we taught it's because the lvol10 which reside in vg00 that having 32GB of size. However according to the system admin, that is the original configuration and they haven't change it. Is there any other things that I can look into? Please find attached nickel output for your reference.

 

Thanks and regards.