make_tape_recovery

[Shattia Moorthi]

dear experts,

When i do make tape recovery. No output.
I used this command to my rx6600 server:
#nohup make_tape_recovery -Av -a /dev/rmt/8mn &

when i do #tail -f nohup.out supposed have out put but i can't get out put.

ioscan tape drive it was claimed.
normal copy using tar ok.

experts I need ur help

thanks in advanced

[Michal Kapalka (mikap)]

hi,

use :

tail -f /var/opt/ignite/recovery/latest/recovery.log

mikap

[Taifur]

Hi ,

Try to take make tape recovery by using below command

# ioscan -funC tape

# make_tape_recovery -a /dev/rmt/?mn -I -v -x inc_entire=vg00

?mn= 1mn/ 2mn , means which shows after using ioscan -funC tape

If helps, pls assign point.
Cheers//
taifur

[Prasanth V Aravind]

yes .. i had seen the same problem ...

make_tape_recovery not redirect output to nohup.out.

suggest you to look recovery.log for further reference.

Gudlcuk
Prasanth

[S.N.S]

Hi,

Please note that the 'recovery' in
tail -f /var/opt/ignite/recovery/latest/recovery.log

may be a directory named after the 'date' of creation.

HTH
SNS
Points!!

[Steven E. Protter]

Shalom,

There is a log file in /var/opt/ignite

It probably says something relevant.

SEP