need ignite B.5.4.50 for hpux 10.20 fast!

[Bob Brown_1]

I need a depot to install B.5.4.50 (as I understand it, the last version of ignite to run on 10.20, therefore the one with the most bug fixes for 10.20).

How/where can I get this quickly?

thanks!

-Bob

[Peter Godron]

Bob,
does not seem to be no longer available directly from HP:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=717178

You probably need the CDs or somebodies private archive !

[Bob Brown_1]

thats what I figured, so that's what I am asking for.

thanks.

-Bob

[Prashanth.D.S]

HI Bob,

Check if the below link can be of any help to you...

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=988912

Best Regards,
Prashanth

[Bob Brown_1]

Ok...I found a depot containing B.5.4.50 ignite.

I had to set swinstall to 'allow incompatable sw' to make the install work.

The install seemed to work and ignite is creating a bootable archive tape.

Am I going to run into problems, or will B.5.4.50 work fine on a 10.20 system.
(the depot was called:
Ignite-UX-10-20_B.5.4.50_HP-UX_B.11.00_32+64.depot

Should I be ok?

thanks!

-Bob

[Dave Hutton]

My gut feeling is that installing ignite for 11.0 on a 10.20 server isn't probably advisable. I guess I wouldn't take the chance, since you are depending on this to work in the case something breaks.

Something as how 10.20 may read startup information maybe totally different then 11.0.

[Bob Brown_1]

But the depot says that it IS for 10.20.

I think this depot gets installed to 11.0 and then is installed to 10.20 clients if you use the 11.0 host to set up the 10.20 host for recovery.

Wouldn't that make this safe?

[Bob Brown_1]

I found a depot with ignite A.3.5.89.

For 10.20, is this a good release to use to make tape archives or is it buggy?
thanks.

-Bob