Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

"NFS server not responding still trying" while igniting vm guest using lanboot

 
Himanshu_Sourav
Occasional Advisor

"NFS server not responding still trying" while igniting vm guest using lanboot

I am trying to ignite a vm guest with hp-ux using ignite server. after filling in network details(client/server ip default gateway) the system gets stuck at 

* Bringing up Network (lan0)
add net default: gateway 15.213.244.1
* Reading configuration information from server...

* NFS mounting clients directory.
NFS server xx.xxx.xxx.xxx not responding still trying
NFS server xx.xxx.xxx.xxx not responding still trying

I have another guest on the same host which I ignited using the same ignite server, which is working perfectly fine.

both vm share the same vswitch.

 

guest machine is on efi shell, trying to ignite system for the first time...

I have tried a different disk too, I am not sure what might be the problem/solution... kindly advise

 

 

2 REPLIES 2
madhucass
Occasional Visitor

Re: "NFS server not responding still trying" while igniting vm guest using lanboot

Hi

 

 

check the ignite server ip while creating dbprofile.

 

>>after filling in network details(client/server ip default gateway) the system gets stuck--->Hope details are correct

 

cross verify if the same ignite server ip is reflected in the dialog box which will be prompted for confirmation.

 

Regards

 

Madhu

Himanshu_Sourav
Occasional Advisor

Re: "NFS server not responding still trying" while igniting vm guest using lanboot

thanks Madhu, but I did crosscheck and verify those details a number of times.

however when i tried with a different client ip, it worked fine, any idea what might have caused this..?

and yes both IP's are on same subnet

 

original ip 15.213.245.79  // doesn't work

 

new ip 15.213.245.81  //worked without any glitch

 

rest all details were unchanged.