Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

"See the server logfile" message in the server logfile

Highlighted
paul_xedos
Frequent Advisor

"See the server logfile" message in the server logfile

Hi,

I'm setting up a 11.31 ignite server pointing to a depot for the core media. All has gone well with no errors in set up except when I attempt to point a new install client at the server I receive the error 

 

"There was no installation started for client "hpuxclientA". See the server logfile ( /var/opt/ignite/logs/ignite) for errors"

 

If I look in the ignite log exactly the same error is shown

 

I've been through the ignite Troubleshooting Guide and everything is in place

 

bash-4.0# instl_adm -T
* Checking file: /opt/ignite/data/Rel_B.11.11/config
* Checking file: /opt/ignite/data/Rel_B.11.11/hw_patches_cfg
* Checking file: /var/opt/ignite/data/config.local
* Checking file: /opt/ignite/data/Rel_B.11.23/config
* Checking file: /opt/ignite/data/Rel_B.11.23/hw_patches_cfg
* Checking file: /opt/ignite/data/Rel_B.11.31/config
* Checking file: /opt/ignite/data/Rel_B.11.31/hw_patches_cfg
* Checking file: /var/opt/ignite/data/Rel_B.11.31/core_cfg

 

 

 

# share -F nfs -o rw=engineering -d "home dirs" /home
share -F nfs -o anon=2 /var/opt/ignite/clients
share -F nfs -o anon=2 /var/opt/ignite/depots

 

# cat /etc/inetd.conf ( relevant lines only shown)

tftp dgram udp wait root /usr/lbin/tftpd tftpd\
/opt/ignite\
/var/opt/ignite

 

bootps dgram udp wait root /usr/lbin/bootpd bootpd
instl_boots dgram udp wait root /opt/ignite/lbin/instl_bootd instl_bootd

 

Does anyone have any ideas what to look at next?

 

Thanks

Paul