Operating System - Linux
1748169 Members
4069 Online
108758 Solutions
New Discussion юеВ

Re: Deploying a Linux Image

 

Re: Deploying a Linux Image

no changes were made.
Mitchell Kulberg
Valued Contributor

Re: Deploying a Linux Image

That is VERY odd.

When you get to the "press enter to activate this console", that is a sign that the RAMdisk is completely booted. I cannot imagine why it didn't work.

Is this something you've seen before or is this the first time? And can it be repeated?

Re: Deploying a Linux Image

I can repeat it if need be.

The only issue is I cant seem to capture the output on the ILO console fast enough so I can share the step by step information with you
Mitchell Kulberg
Valued Contributor

Re: Deploying a Linux Image

Mario,

Still too many possibilities :(

What I think we need are the failure messages you get.

On the task results screen it lists the various steps it is going to take to perform the task. If you select the individual step that failed, you should see some type of failure message under the operations deatils at the bottom.

I think I need to know what errors you are seeing during these various failures.

Mitch

Re: Deploying a Linux Image

Mitch

When it failed at the No response from RAM disk that was the same message below.