Operating System - Linux
1748148 Members
3699 Online
108758 Solutions
New Discussion

Re: ICE Linux nagios HP graph network summary

 
Peter_Vreman
Occasional Contributor

ICE Linux nagios HP graph network summary

In nagios in the hp graph plugin. The graphs of network summary for a host are not shown if the host has > 10 interfaces. This comes from the max_nics setting:

my $max_nics = 10; # maximum possible NICs on a node

A full height blade having 12 NIC ports using bonding and a localhost has at least 19 interfaces. Can this limited be raised a value like 30 or 40?

Thanks,
Peter
1 REPLY 1
Christopher Grandinetti
Frequent Advisor

Re: ICE Linux nagios HP graph network summary

Hello Peter,

We believe that increasing this number is ok and will not cause any adverse affects.

However, we will need to investigate this further to be certain. We will do this and reply back to this thread when that investigation is complete.

Regards,
-Chris