Insight Control for Linux
cancel
Showing results for 
Search instead for 
Did you mean: 

hplog error 7.70 RHEL4

James Geneva
Occasional Contributor

hplog error 7.70 RHEL4

Any ideas on this error? We reinstall Health drivers 7.70 and all is well.

[root@a ~]# hplog -v
hpGetSemID() semget failed: No such file or directory
hplog: Cannot open /dev/cdt.
Wellness driver may not be installed.
hpGetSemID() semget failed: No such file or directory
hplog: Unable to open the /dev/cpqhealth/cevt file.
[root@a ~]#

[root@nps26002 ~]# rpm -qa | grep hp
hpasm-7.7.0-115.rhel4
hpvca-2.1.7-1
hpacucli-7.70-12
hpdiags-7.7.0-142
hppyd-1.0.3-6
rhpl-0.148.3-1
hpsmh-2.1.7-168
hprsm-7.7.0-99.rhel4
hp-pel-1.0.0-9.rhel4
hpadu-7.70-12
hponcfg-1.6.0-1

[root@nps30034 ~]# service hpasm status

Using high performance hp-OpenIPMI device driver


hp-OpenIPMI Status:
Module Size Used by
ipmi_si 39904 2
ipmi_devintf 13448 4
ipmi_msghandler 33516 2 ipmi_si,ipmi_devintf

hpasmxld is running... [ OK ]
Status of Foundation Agents (cmafdtn): cmathreshd cmahostd cmapeerd

cmathreshd is running... [ OK ]

cmahostd is running... [ OK ]

cmapeerd is running... [ OK ]
Status of Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd

cmastdeqd is running... [ OK ]

cmahealthd is running... [ OK ]

cmaperfd is running... [ OK ]
Status of Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided cmascsid cmasasd

cmaeventd is running... [ OK ]

cmaidad is running... [ OK ]

cmafcad is running... [ OK ]

cmaided is running... [ OK ]

cmascsid is stopped... [ OK ]

cmasasd is stopped... [ OK ]

2 REPLIES
Steven E. Protter
Exalted Contributor

Re: hplog error 7.70 RHEL4

Shalom,

Guess: The first install was not complete.

PSP is at version 8.10 now if you have time, you may want to upgrade.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Thomas Matthews
Occasional Visitor

Re: hplog error 7.70 RHEL4

You probably only need to run :
# service hpasm restart

I had a similar situation upgrading to hpasm-8.0.0-173.rhel4

Cheers,
Tom