Insight Remote Security
1753894 Members
7918 Online
108809 Solutions
New Discussion юеВ

Re: Problem with ISEE and WEBES on an AMD Opteron system

 
SOLVED
Go to solution
Phillip Thayer
Esteemed Contributor

Problem with ISEE and WEBES on an AMD Opteron system

We are trying to install ISEE on a system under Windows 2003 R2 on an AMD Opteron chip. We keep getting a message indicating that WEBES is not supported by this processor type.

Is WEBES really NOT supported on the AMD Opteron? If it isn't what do we use in it's place so we can run ISEE? How can we setup ISEE if we don't have WEBES?

Thanks,
Phil

 

 

P.S. this thread has been moved from General to Services > Insight Remote Support > Security. - Hp Forum Moderator

Once it's in production it's all bugs after that.
6 REPLIES 6
raadek
Honored Contributor
Solution

Re: Problem with ISEE and WEBES on an AMD Opteron system

Are you running 64-bit version of 2003? If that's your case have a look there:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1032728

Rgds
Don't panic! [THGTTG]
Phillip Thayer
Esteemed Contributor

Re: Problem with ISEE and WEBES on an AMD Opteron system

That is exactly what our problem is. We are running the 64 bit version of windows. The suggestion was to run a model 3 clientless installation. What is a model 3 clientless installation and how do I set that up?

Phil
Once it's in production it's all bugs after that.
Sameer_Nirmal
Honored Contributor

Re: Problem with ISEE and WEBES on an AMD Opteron system

ISEE doesn't support AMD 64-bit platforms. In this case, one has to be follow the model 3 type of configuration of ISEE

Refer these links for the details.
http://h20219.www2.hp.com/services/cache/10711-0-0-225-121.aspx
http://ftp.hp.com/pub/services/hardware/info/isee_client.pdf
Phillip Thayer
Esteemed Contributor

Re: Problem with ISEE and WEBES on an AMD Opteron system

How does the WEBES for EVA monitoring work in a model 3 ISEE configuration? Doesn't WEBES still have to run on the 64-bit system where it is not supported or installable?

Phil
Once it's in production it's all bugs after that.
Phillip Thayer
Esteemed Contributor

Re: Problem with ISEE and WEBES on an AMD Opteron system

O.K. Now that I have look4ed at the documentation closer, I am really confused as to why ISEE will NOT work on the AMD64 systems. The link below indicataes that it should work on page 2 where it says "Microsoft Windows Server for 64-bit server editions" under Proliant Servers listing DL servers.

http://ftp.hp.com/pub/services/hardware/info/isee_client.pdf

This statement would seem to indicate that a DL385 running Windows 2003 64-bit OS should be supported.

Which is it. If it is supported then where is the proper client for the DL385? I still cannot believe that HP would not support the AMD chip since they sell so many of them.

Phil
Once it's in production it's all bugs after that.
Sameer_Nirmal
Honored Contributor

Re: Problem with ISEE and WEBES on an AMD Opteron system

If you take a look at the first link in my last post, you will see a pdf of ISEE supported hardware where it is mentioned clearly.

ftp://ftp.hp.com/pub/services/hardware/info/isee_supported_hardware.pdf

Secondly, the latest WEBES version doesn't support AMD Opetron. Hence you see the message. It is mentioned at

http://h18000.www1.hp.com/support/svctools/webes/45webes_rn.pdf

I would expect the support for AMD processors in near future from HP.

Now for EVA monitoring, you might want to have ISEE/WEBES installed on supported hardware platform only.