Insight Remote Security
1748180 Members
3865 Online
108759 Solutions
New Discussion юеВ

configuring HTTP proxy for ISEE

 
Julian Kania
Occasional Advisor

configuring HTTP proxy for ISEE

Hi.

I have a hpux11.23 with ISEE installed.

Becouse some network configuration changes, I have no longer direct access to isee.europe.hp.com.

Instead, I have to use a HTTP proxy in 192.168.x.x network.

Where should I configure ISEE (or whole system) to use HTTP PROXY?

thanks in advance, Julian
5 REPLIES 5
Anshumali
Esteemed Contributor

Re: configuring HTTP proxy for ISEE

1. ISEE going EOL
2. You can open ISEE page and under system, in the last i hope there was a option. (I am not on system, so cant provide port number)
Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
Anshumali
Esteemed Contributor

Re: configuring HTTP proxy for ISEE

Sorry for one more post:
Page location...
http://UNIX_IP:5060/start.html

Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
Julian Kania
Occasional Advisor

Re: configuring HTTP proxy for ISEE

Thanks for your help.

However, This is not the solution.

When I connect with http://server:5060, I have HTTP 200 OK answer after few seconds delay, but the served site is empty.


tail /var/opt/hpservices/log/mad.log:

010808 14:44:53.554 ERROR,[Comm] Comm::send /opt/hpservices/mqueue/OQ371a_CONN_HP_Services.mot failed
010808 14:44:53.563 ERROR,[Comm] sendReceive FAILED
010808 14:44:53.563 ERROR,[Comm] NetworkException (1): socket.cpp:116 (238) Connection timed out Socket::connect(): socket() failed: isee.europe.hp.com (192.6.126.144)

one more test:
date; telnet 192.168.x.y 5060 ; date

Fri Aug 1 14:43:27 MESZ 2008
Trying...
Connected to 192.168.x.y.
Escape character is '^]'.
Connection closed by foreign host.
Fri Aug 1 14:43:32 MESZ 2008

Any idea?

Julian.
Anshumali
Esteemed Contributor

Re: configuring HTTP proxy for ISEE

hmm....try the http://UNIX_IP:5060/start.html fully, not just http://UNIX_IP:5060
Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
Fabio Ettore
Honored Contributor

Re: configuring HTTP proxy for ISEE

Hi,

it should be into /opt/hpservices/etc/motprefs and look for proxy lines.

Also take a look to manuals:

http://docs.hp.com/en/5991-7658/5991-7658.pdf

www.hp.com/learn/isee

HTH.

Best regards,
Fabio
WISH? IMPROVEMENT!