HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check RSP 5.30 Standard Edition

 
SOLVED
Go to solution
Ralf Gerresheim
Frequent Advisor

How to check RSP 5.30 Standard Edition

Hi,
I've installed RSP 5.30 Standard Edition on a Proliant Server just for "Calling Home" for two EVA8400 systems. Command View 9.1 is also istalled on that server.
All the configurations are done.
Server and EVA are discovered successfully.

How can I check, that "Calling Home" will work if a error on the EVA systems occur (without generating an error by myself)?
2 REPLIES
Andrew Claiborne
Valued Contributor
Solution

Re: How to check RSP 5.30 Standard Edition

Hi Ralf,

Does executing "wccproxy test" on the Command View server give you the verification you need?

Best Regards,
-Andy
Ralf Gerresheim
Frequent Advisor

Re: How to check RSP 5.30 Standard Edition

Hi Andy,

thats absolutely the correct answer.
You can see the status in the System Event Analyzer (SEA) (status: delivered, ISEE,...)
Thanks.
Ralf