ISEE Install

[Chad Brindley]

Hi,

HPUX 11.23
HP Itanium Servers

This is installed on some of our HPUX boxes but was done by an engineer on setup, we now require this being setup on some new Itanium systems we have here.

Firstly;

How can I check if ISEE is installed, we connect through netscape on our other systems. Tried on this one as root and it does not recognise in /sbin/sh.

Secondly;

How can I install on our system if it isn't already? Are there any patch dependencies etc.....

Any help appreciated.

Chad

[Liem Nguyen]

Hi Chad,

"swlist | grep -i isee" will tell you if ISEE has been installed or not.

If ISEE has not been installed, you can download software from:
http://software.hp.com

Before doing the installation, please review the Installation Guide: http://docs.hp.com/en/5990-8547/ln-d0e227.html

Patch listing and other requirements can be found in Appendix A (page 50) under: Preparing HP-UX Clients for Installation

Hope this helps,

[Chad Brindley]

Hello,

Thanks for the great response;

I have the ISEE platform installed but I have no netscape installed from what I can see.

I dont know what to do about installing netscape to connect through to ISEE.

Any idea's?

Chad

[DCE]

You can access ISEE through any Internet browser.

The address you go to is
http::5060/start.html

You do not need to have netscape installed on the unix box for this to work.


the default id is admin
The default password is isee

[Chad Brindley]

Hi,

This does not allow me to do this because of our firewall or proxy configuration I believe.

This is why I wanted to connect internally through unix using netscape.

Does anyone know how to install this?

Chad

[DCE]

A quick and dirty fix - plug a laptop into the segment to configure ISEE.

To install Netscape: It was available on one of the application cd's - don't know if it still is. use swinstall to install it

Just so you know, ISEE does need access through your firewall to work

[DCE]

Chad

here is the netscape download site (it has the hpux version )

http://browser.netscape.com/ns8/download/archive47x.jsp

[Liem Nguyen]

Chad,

Netscape is NOT required for ISEE to work. If you have ISEE installed on your HP-UX, make sure:
1. mad daemon is running
2. emsagent and emsListener are running.
3. Make usre port 80 on your Firewall is open for outbound traffic.

Then:
1. From your desktop, logon to the ISEE GUI on the HP-UX box: http://hostname:5060/start.html

2. Continue with the Configuration and Submit.
3. If you receive the next screen, fill in the Serial number, product number and Entitlement ID, submit again.
4. When you receive an email saying your Server is being monitored by HP, then you all all done.

Regards,

[Chad Brindley]

Hi,

As i explained previous I cannot access ISEE through IE as our PC's are on a different network as the HP servers and they are on a different network which site behind the firewall, however i found Mozilla on these boxes and ran Mozilla to open.
I enter the URL; http://ipaddress:5060/start.html

and I get a connection refused by host message. How do I activate the port on the host?

I can connect to already configured servers for ISEE without a problem.

Regards,

Chad

[DCE]

Chad

Check your isee log files on the server. They are in:
/var/opt/hpservices/log