Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Insight Remote Support
Showing results for 
Search instead for 
Did you mean: 

ISEE and VAEH-- installation question

Go to solution
Valued Contributor

ISEE and VAEH-- installation question

Hi All,

Should I download and install the ISEE software for all the servers and also ISEE with VAEH component where cv-sdm installed? Like:

Server1: install ISEE only
Server2: install ISEE+ ISEE with VAEH, in this server cv-sdm is installed

Owen Campbell
Occasional Advisor

Re: ISEE and VAEH-- installation question

Hi Richard,

You need to install ISEE and the ISEE VAEH component on the server where you have CVSDM installed.

You should only have one server in your san that is actively monitoring the VA with CVSDM, and that is where you should have the VAEH component installed to interact with ISEE. If you have more than one server with CVSDM installed, you must ensure that you have the polling on the other servers turned off, otherwise, you will be putting unnecessary load on the VA array.