ISEE client (in DMZ) to SPOP communication

[Pupil_1]

Hi,

My HP 11.11 machine is in DMZ and want to register it to SPOP. Please advise the changes in firewall to require communication to happen.
This is what I've found from the ISEE document.
(If you are not using a Web proxy server, you must open your firewall to allow
communication over port 80. The ISEE client software uses port 80 to send encrypted
data to HP and to receive acknowledgements and information in response to requests
from the ISEE client software.)

Question: Open tcp/80 from ISEE client to SPOP? Is this information enough for the firewall team or do i need anything else?

[KuehnUl · Accepted solution]

Hallo Pupil

the tcp/80 should be enough. You can test the connection on the client browser:

http://SPOP-IP-ADDRESS/mots/motserv

Regards, Uli

[Pupil_1]

Many Thanks Uli...

It's going to take some time for me to confirm that it was enough. If i find anything more later, I'll upate the thread.

N.B I'm assigning your piece of pie !

N'joy.