HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

ISEE on SMA - simulate disk problem test

 
SOLVED
Go to solution
michael denny_1
Occasional Contributor

ISEE on SMA - simulate disk problem test

Hi,

I've just setup ISEE/OSEM/WEBES on our EVA's.

IseeConnectivityTest.bat, OSEM test events (from the OSEM gui) and WEBES test events (wsea test) all work OK and show up in the ISEE client and HP then responds which is as expected.

Its great that these test events work, but I'd really prefer to simulate an actual EVA problem (eg lost/bad disk etc). Is there some other way I can test or simulate this to see if the problem gets picked up OK and gets thru the WEBES/OSEM/ISEE chain to HP?

The SMA is a Windows based system so things like send_test_event dont work.

Any suggestions much appreciated.

Thx
MD
1 REPLY
Liem Nguyen
Honored Contributor
Solution

Re: ISEE on SMA - simulate disk problem test

Hi,

I believe you can unplug the Fiber cable or pull out a disk (if possible), these will generate a real event.

Regards,