Insight Remote Support
1748197 Members
2585 Online
108759 Solutions
New Discussion юеВ

Insight Remote Support RSA5.80 installation fails

 
Jens Jeckl
Advisor

Insight Remote Support RSA5.80 installation fails

Hallo Community,

I'm currently try to install RSA_A.05.80 on a HP Insight Control 7.1 system but it fails with following error message:

Failed to register WSC files. Please manully register WSC files by executing register.cmd in CLI directory.

I have done as proposed by installation message but it doesn't work.

So I tried to investigate where the problem could be.

I run register.cmd from command line with output results in a text file and checked this, please find below the results

X64 architecture detected
Successfully registered "D:\program files (x86)\hp\RSSWM\CLI\\HPISEEcommon.wsc"
Successfully registered "D:\program files (x86)\hp\RSSWM\CLI\\HPISEElogger.wsc"
Successfully registered "D:\program files (x86)\hp\RSSWM\CLI\\HPISEEproperties.wsc"
Successfully registered "D:\program files (x86)\hp\RSSWM\CLI\\HPISEEservice.wsc"
Successfully registered all .WSC files
Creating Sched Tasks
Error "Creating Audit Scheduled Task"

So it seems there is no problem with registering the WSC files but an error occurs at "Creating Audit Scheduled Task".

Operating system:Windows Server 2008 Standard x64

Version: Systems Insight Manager 7.1.0 - Windows

Build version: C.07.01.00.00

Build date:2012-06-06 17:20

уАА

Does anyone knows how to fix this Problem or could advise?

2 REPLIES 2
Jens Jeckl
Advisor

Re: Insight Remote Support RSA5.80 installation fails

Hi Community,

 

I hope there is someone active in here.

After I have tried several installations fo RSA5.80 I tried to install RSA5.70. the installation have had worked but configurations failes  with following error message:

Failed to connect to HP Support Center, please click back and verify your proxy settings. <= They are correct, checked several times

For  additional infirmation refere to following log file: c:\Users\%username%\AppData\Roaming\hp\rsp\5.70.0.0\RSSWM_Install.log

 

Here the log entries, I hope someone could prvide me an tip.

 

2/12/2013 5:49:30 PM [DEBUG] CheckConnForm: CheckConnForm OnVisibleChanged was called.
2/12/2013 5:49:30 PM [DEBUG] CheckConnForm:   form was hidden.  stopping timer
2/12/2013 5:49:30 PM [DEBUG] DataInput1Form: Determining if email fields should be shown...
2/12/2013 5:49:30 PM [DEBUG] DataInput1Form:   Based on values of SendNotifications(True)
2/12/2013 5:49:30 PM [DEBUG] DataInput1Form:                  and SendReports      (True)
2/12/2013 5:49:30 PM [DEBUG] DataInput1Form: Either SendNotifications or SendReports was true.  Making email fields visible.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form.setTmpPrxyValues: Writing TMPPRXY values...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling SetValues on TMPPRXY.EDM...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: ...done
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying values were written correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that USEPROXY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXDISC was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXADDR was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Writing preface values...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Getting handle to environment...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Determining RS root drive and folder...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling setvalues on PREFACE
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying we set preface values correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSPHASE was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSREGN was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSTYPE was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSSIMTYP was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Writing zmaster values...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Getting handle to environment...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Determining RS root drive and folder...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: RSDIR=\Program Files (x86)\HP\
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: RSDRV=D:
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling setvalues on ZMASTER
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying we set zmaster values correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSDIR was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RSDRV was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Writing RSSWM\PREFER.EDM values...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling SetValues on RSSWM\PREFER.EDM...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: ...done
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying values were written correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXPWD was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXPWDL was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXUID was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Writing SWMPROPS values...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   Will write LANGUAGE=en
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Will write CUSTNFY=Y
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Will write CUSTRPTS=Y
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Will write GBLCNST=A
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling SetValues on SWMPROPS...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: ...done
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying values were written correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that COMPANY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that COUNTRY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that ENDPOINT was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that LANGUAGE was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that REGION was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that SCHED was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that VERSION was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that USEPROXY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXDISC was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that PROXADDR was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that CEMAIL was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that CUSTNFY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that CUSTRPTS was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that GBLCNST was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Calling SetValues on RADSETUP...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: ...done
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Verifying values were written correctly...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that RADTRAY was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that EXBSETUP was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that EXBEXIT was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that ZGRPINFO was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   * Checking that ALWAYSS was set correctly.
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Determining if email fields should be shown...
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:   Based on values of SendNotifications(True)
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form:                  and SendReports      (True)
2/12/2013 5:49:38 PM [DEBUG] DataInput1Form: Either SendNotifications or SendReports was true.  Making email fields visible.
2/12/2013 5:49:38 PM [DEBUG] CheckConnForm: CheckConnForm OnVisibleChanged was called.
2/12/2013 5:49:38 PM [DEBUG] CheckConnForm:  form was made visible.  clearing progress bar and starting timer
2/12/2013 5:49:38 PM [DEBUG] CheckConnForm: CheckConnForm calling connectivity check method...
2/12/2013 5:49:38 PM [DEBUG] RadiaCommandRunner:    RadiaRsInstallRoot is : D:\program files (x86)\HP\CM\RSSWM
2/12/2013 5:49:38 PM [DEBUG] RadiaCommandRunner: Radskman wrapper name is: D:\program files (x86)\HP\CM\RSSWM\lib\rsswm_radskman.exe
2/12/2013 5:49:38 PM [DEBUG] RadiaCommandRunner:In hasConnectivity()
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:   No services retireved from ASERVICE.
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:  services array was null.  Returning empty string dictionary for service dictionary:CM_GL_TESTPACKAGE_WIN
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:  service contained zero properties.  Returning false.
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:In installPackage(CM_GL_TESTPACKAGE_WIN)
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:In runRadiaCommand(sslmgr=rsswm.policy.hp.com, sslPort=443, RCSURI=TCPS://rsswm.policy.hp.com:443, DATAURI=HTTPS://rsswm.software.hp.com:443, uid=00_1F_29_0C_35_BC946387455714100, mname=RSPS, dname=SWM, startdir=RSSWM, context=m, cat=prompt, ulogon=n, del=n, ind=n, sname=CM_GL_TESTPACKAGE_WIN, cop=m,log=CM_GL_TESTPACKAGE_WIN_install.log, sendcat=y,-1)
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:  Executing: D:\program files (x86)\HP\CM\RSSWM\lib\rsswm_radskman.exe sslmgr=rsswm.policy.hp.com, sslPort=443, RCSURI=TCPS://rsswm.policy.hp.com:443, DATAURI=HTTPS://rsswm.software.hp.com:443, uid=00_1F_29_0C_35_BC946387455714100, mname=RSPS, dname=SWM, startdir=RSSWM, context=m, cat=prompt, ulogon=n, del=n, ind=n, sname=CM_GL_TESTPACKAGE_WIN, cop=m,log=CM_GL_TESTPACKAGE_WIN_install.log, sendcat=y
2/12/2013 5:49:41 PM [DEBUG] RadiaCommandRunner:  Waiting up to -1 milliseconds for command to return...
2/12/2013 5:49:43 PM [DEBUG] CheckConnForm:  Recieved an elapsed event -- Handling in Timer_Tick
2/12/2013 5:49:43 PM [DEBUG] CheckConnForm: timerCheckConn sent an elapsed event17:49:43.3422591
2/12/2013 5:49:43 PM [DEBUG] CheckConnForm:    progress bar value was: 0
2/12/2013 5:49:43 PM [DEBUG] CheckConnForm:   progress bar value updated to: 7
2/12/2013 5:49:43 PM [DEBUG] RadiaCommandRunner:  * stderr =
2/12/2013 5:49:43 PM [DEBUG] RadiaCommandRunner:  * stdout =
2/12/2013 5:49:43 PM [DEBUG] RadiaCommandRunner:  * ExitCode = 754
2/12/2013 5:49:43 PM [ERROR] Failed to install new test package, connectivity failed
2/12/2013 5:49:43 PM [DEBUG] RadiaCommandRunner:  handleTestPackage returned false.  Returning false.
2/12/2013 5:49:43 PM [DEBUG] CheckConnForm:...connectivity test failed.  Setting from to failed connectivity check state.

PProcopi
Advisor

Re: Insight Remote Support RSA5.80 installation fails

I have the same problem. Any HELP ....