Insight Remote Support
1748267 Members
3713 Online
108760 Solutions
New Discussion

Re: New Setup Devices Issue

 
musc_county
Occasional Contributor

New Setup Devices Issue

We have installed Insight Remote Support and have added devices, but some servers are showing 1 or more red X's even though we have added, or tested, the correct credentials for SNMP (v1 or v2), iLO, WMI, etc.  The devices are under warranty and meet the Generation requirements.  Suggestions on where to find troubleshooting suggestions?  Is there tech support for this or is this a use at your own risk product?  Thank you.

1 REPLY 1
SANJAY MUNDHRA
HPE Pro

Re: New Setup Devices Issue

Hi, 

You may need to click on the Devices --> Monitoring and Collections to check why the devices are shoing Red. If the protocol has been Monitoring Protocol has been configured correctly then you may need to check the protocol used for collections, as this can be different as comared to the Monitoring protocol for some devices such as SAN Swicthes etc.

You can refer the IRS Managed Device Configuration guide for more details on how to discover the servers and the various protocols needed  - https://support.hpe.com/hpsc/doc/public/display?docId=a00023073en_us 

Other good IRS documentations are available at http://h17007.www1.hpe.com/us/en/enterprise/servers/solutions/info-library/index.aspx?cat=HP_Insight_Remote_Support#.WhYp4WYUmuU 

As regards getting support, you can log a case with with HPE IRS Support team using the serian number of one of the managed device under active warranty/suport with HPE. HPE rovides complimentery support for IRS software.

Cheers,

Sanjay

Cheers,
Sanjay Mundhra
I am a HPE Employee

Accept or Kudo