Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP Configuration Status = Misconfigured

Tinux
Advisor

SNMP Configuration Status = Misconfigured

I'am setting op HPE IRS to monitor some Proliant servers and a StoreVirtual SAN.

However: when I set snmp from CMC, I get "SNMP Configuration Status = Misconfigured" alarms for every storage node

When I check SNMP per node from the StoreVirtual CLI shell, all settings are there !!!

But when I have CMC send a Test Trap, only a of couple nodes actually send a trap, even when CMC states that SNMP is misconfigures on that node

The only thing that clears the alarm is: disable SNMP !!!

Please help, I'am getting pretty desparate.

3 REPLIES
Torsten.
Acclaimed Contributor

Re: SNMP Configuration Status = Misconfigured

You should review the chapter about StoreVirtual in the Insight RS "Monitored Devices Configuration Guide".


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tinux
Advisor

Re: SNMP Configuration Status = Misconfigured

I did and followed every step, but still I end up with all nodes complaining that SNMP is misconfigured.

I also installed a MIB browser on the managing/monitoring host., but every query I try on a node I get no response.

All nodes have just been upgraded to the latest Lefthand OS

This is the reply from the CLI getSnmpInfo:

RESPONSE
result 0
processingTime 437
name CliqSuccess
description Operation succeeded.

SNMPSERVICEPOLICY
started true
location
contact

SNMPNOTIFICATIONPOLICY
verbosity verbose
alertOnWarning true
alertOnInfo false
alertOnCritical true

SNMPCOMMUNITYSTRING
ip-hostname Default
communityString public

SNMPCOMMUNITYSTRING
ipsubnet 192.168.13.60
ipmask 255.255.255.255
communityString public

SNMPTRAPTARGET
version 1
ipAddress 192.168.13.60
communityString public

Torsten.
Acclaimed Contributor

Re: SNMP Configuration Status = Misconfigured

Consider to ask your question here

https://community.hpe.com/t5/Insight-Remote-Support/bd-p/itrc-305/post-type/message


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!