Insight Remote Support
1748081 Members
5210 Online
108758 Solutions
New Discussion юеВ

SPOP UPGRADE FROM V3 TO V4

 
SANJAY MUNDHRA
HPE Pro

SPOP UPGRADE FROM V3 TO V4

I will be doing an SPOP UPGRADE FROM V3 TO V4 and want to retain the Device configuration. Is there a procedure to do the same.


Cheers,
Sanjay Mundhra
I am a HPE Employee

Accept or Kudo

3 REPLIES 3
Maurice Skubski_1
Valued Contributor

Re: SPOP UPGRADE FROM V3 TO V4

no problem, you can create a backup disk with all data which you can insert in v4. This is described in the V4 Installation Guide. This document is very important if you want to do the upgrade! regards ms
SANJAY MUNDHRA
HPE Pro

Re: SPOP UPGRADE FROM V3 TO V4

Thanks very much for the reply, I just want to restore the device data files, is there any specific file ?
Cheers,
Sanjay Mundhra
I am a HPE Employee

Accept or Kudo

Liem Nguyen
Honored Contributor

Re: SPOP UPGRADE FROM V3 TO V4


Hi,

The SPOP install and upgrade guide: http://sstwww.fc.hp.com/ISEE/spop/index.htm has the info for you to do the upgrade and save some of the data from the old V3 database.
Take a look at the Upgrade steps starting on page 30, pay attention to CollectPartnerData and ImportCollections scripts, these are the scripts to save the old database and restore it again on the V4.

Hope this helps,