Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

SSH Credentials says No valid connection to Brocade SAN director with HPRS 7..7.0.20

HenkSnel
Occasional Visitor

SSH Credentials says No valid connection to Brocade SAN director with HPRS 7..7.0.20

Hi,

I've a issue wth configuring SSH credentials for a Brocade SAN director (running FOS version 6.4.3b).

When I start the SAN Configuration Collection for this device, i get the following error:

No valid connection to: sw181-mgmt.example..nl using Protocol: SSHProtocol

I am sure that the provided user/password are correct. However, I can successully log into the SAN device when I use the same user/password using Putty.

Does anybody know what could be the problem here?

Thanks for your help.

Henk Snel

 

 

2 REPLIES
HenkSnel
Occasional Visitor

Re: SSH Credentials says No valid connection to Brocade SAN director with HPRS 7..7.0.20

I think I found the potential problem. When I try to setup a SSH session via powershell, it takes it long time to establish the SSH session. I think I am facing a timeout problem.
Does anybody  know how to increase the time to establish the SSH session?

HenkSnel
Occasional Visitor

Re: SSH Credentials says No valid connection to Brocade SAN director with HPRS 7..7.0.20

Problem solved!

The problem was caused due to non-existing dns servers were configured on the SAN directors.