Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

This system does not have any SMI-S CIMOM installed

Ahmed BH
Advisor

This system does not have any SMI-S CIMOM installed

I am trying to configure my hp-ux for RSP 05.10, and after completing configuring the WBEM and while trying to indentify the HP-UX server i am getting the following error:


Checking for WBEM support on system.
This system has WBEM protocol support
This system does not have any SMI-S CIMOM installed


please advice what to be done for the SMI-S CIMOM???
Regards,
Ahmed
4 REPLIES
Olivier Masse
Honored Contributor

Re: This system does not have any SMI-S CIMOM installed

As far as I know, nothing. SMI-S is an interface to talk to your SAN arrays and it should be present only, for example, on hosts that have CommandView.

CAN_3
HPE Pro

Re: This system does not have any SMI-S CIMOM installed

Ahmed,

Have you configured the WBEM on the HP-UX box?

can
I am an HP Employee
Ahmed BH
Advisor

Re: This system does not have any SMI-S CIMOM installed

I managed to solve the problem by re-installing the prerequisists of the HP-UX.
thank you very much
Ahmed BH
Advisor

Re: This system does not have any SMI-S CIMOM installed

Thanks for all of you.