Insight Remote Support
cancel
Showing results for 
Search instead for 
Did you mean: 

Why do iLO initiated traps stall?

Sean Murray_1
Regular Advisor

Why do iLO initiated traps stall?

Hi.

Testing sending traps with the iLO forward of SNMP traps.
Gets to SIM fine. Gets to OSEM fine, but always stalls on delivery if trap sent by RIB.
If I sent traps from the server itself, it works fine.

Anyway to overcome the stalls?

Basically stated in some iLO docs that they can send hardware alerts through to HP in this matter.
But having difficulty getting them to go through.

Opened a case, but have yet to hear back.

Thanks,
Sean

5 REPLIES
Liem Nguyen
Honored Contributor

Re: Why do iLO initiated traps stall?

Sean,

You can try Remote Support Services and Enable All, if you have more than screen load of Clients, you will have to do the same for each screen.
Sean Murray_1
Regular Advisor

Re: Why do iLO initiated traps stall?

Thanks.
Yes, they are all enabled.

Verified the unit I was testing with the iLO was in there and active and it is.

Started poking at OSEM logs as well now.
Thinking it is having an issue with some smnp get not working right contacting the iLO or something.

At a loss at the moment as I invetigate some more.
Liem Nguyen
Honored Contributor

Re: Why do iLO initiated traps stall?

Sean,

Even though, they look like already Enabled, please try enable again. I have seen similar issue before.

Regards,
Sean Murray_1
Regular Advisor

Re: Why do iLO initiated traps stall?

Tried but no dice.

But you have the files and emails I sent to you at this point for my case, so closing here.
Sean Murray_1
Regular Advisor

Re: Why do iLO initiated traps stall?

Case open