Insight Remote Support
1748265 Members
4188 Online
108760 Solutions
New Discussion юеВ

Re: unable to send test event from hp ux managed host to rsp

 
SOLVED
Go to solution
Bill Beardshaw
Occasional Advisor
Solution

Re: unable to send test event from hp ux managed host to rsp

Pawan,

Thanks for the output. It looks like you are having a different issue then I.

I had bogus entries when I checked the output from cimsub -lf and -lh.

From what you sent me it looks like you have not been able to subscribe to wbem events.

Is your CMS Windows or HPUX? I assume Windows as RSP does not work on HPUX as far as I know.

What output do you get when you try to subscribe to wbem events from the CMS?

Have you looked at System Event Analyzer to see if there are any entries for your HPUX servers?

Here is a site I found very useful. It is a demo of setting up HPUX and Windows servers.

https://ebcgws.houston.hp.com/SDP_Content/ContentItems/Global/200812041032311370101690/framework/html/StartFramework.ht

Bill
Pawan Rawat_1
Frequent Advisor

Re: unable to send test event from hp ux managed host to rsp

Hi Bill

sorry for delay,
I finally got my hp ux trap in sim installed in windows

so
hp ux client support rsp on windows

I removed webes and sysfaultmgmt and installed it again.
Also from syslog i found some mismatch in host name so also some modification in host name for cms in host file of hp ux client

finally I can see test event and status closed by hp.
Thank you for support,Bill and Olivir

Thanks
Pawan
Pawan Rawat_1
Frequent Advisor

Re: unable to send test event from hp ux managed host to rsp

problem solved,closing thread

Thanks
Pawan