1 CPU Failed

[Vipin Singhal]

hey Lee,
how to use ctm command?
when i use:

#cstm
cstm>

then i type "sel"
cstm>sel
^-- Syntax error. --
Expected the selection keyword "device", "path" or "all".

Please suggest how to use cstm command

[HGN]

Hi

Here is the cstm syntax

#cstm
cstm>map
cstm>sel dev 1 (select CPU 1 is an example)
cstm>info
cstm>il

Hope this helps

Rgds

HGN

[Andy Torres · Accepted solution]

Try running this as root:

echo "selclass qualifier cpu;info;wait;infolog" | cstm

[Vipin Singhal]

hi
when i was trying this command:
echo "selclass qualifier cpu;info;wait;infolog" | cstm

^-- (Information) is currently disabled. --

^-- (InfoLog) is currently disabled. --

[Andy Torres]

Try running:

/sbin/init.d/diagnostic stop
then
/sbin/init.d/diagnostic start

Then try this again:

echo "selclass qualifier cpu;info;wait;infolog" | cstm

Maybe that'll help getting STM info.

Hopefully, you've opened your hardware call with HP by now. Don't think you can fix this on your own.

[Vipin Singhal]

/sbin/init.d/diagnostic stop
then
/sbin/init.d/diagnostic start

will it effect to any other running problem?
may i run these command now

My server database is up

[Andy Torres]

Shouldn't be a disruption. I stopped and started mine to be sure.

[rmueller58]

GSP from the Console, cstm from SSH or Telnet. check the GSP logs.. I'd call HP for Hdwe support, have them replace it.

[Vipin Singhal]

ok, let me try

[Devender Khatana]

Hi,

This sort of situation normally comes when a CPU is disabled by system during reboot followed by some LPMC errors. But this is surely reported in syslog.log.

Does your system has I-COD installed? If yes and you have system installed with 7 CPU licenses then you can check CPU status using "icod_stat" command.

#icod_stat

HTH,
Devender