Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

A question about rx2600 rackmount

 
Wang,MinJie
Super Advisor

A question about rx2600 rackmount

Hey all
I want to know if I can use rackmount kit of rx16 to rackmount rx26 and where can I find the document about rackmount of rx26
thx in advance
4 REPLIES 4
Peter Godron
Honored Contributor

Re: A question about rx2600 rackmount

Hi,
documents for rackmounting rx26:
http://docs.hp.com/en/hw.html#HP%20Integrity%20rx2600%20Server
"Tower to Rack and Rack to Tower System Conversion Guide"

Which also mentions Document "Installation Guide for Midweight Slide Kit" which should have come with your Installation Kit.
Andrew Rutter
Honored Contributor

Re: A question about rx2600 rackmount

Wang,

I dont know for sure if there the same kit, but they are both the same size server, so its possible.

this is the rx1600 racking guide, for the mid weight slide kit, and you should be able to tell from this.

ftp://ftp.compaq.com/pub/products/servers/proliantstorage/bcs-rackandpower/installation-guide/ig_midweight_5065-7291.pdf

Andy
Sameer_Nirmal
Honored Contributor

Re: A question about rx2600 rackmount

As far as the rack slid kit is concerned, you can use the same kit (5065-7291) for rx1600, rx1620, rx2600,rx2620 servers and it is mentioned in the installation documentation as well.

With this, the same rack-mount kit could be used with these servers as it contains the same slid kit.
rick jones
Honored Contributor

Re: A question about rx2600 rackmount

Andrew - an rx16XX is a 1U server. An rx26XX is a 2U server.
there is no rest for the wicked yet the virtuous have no pillows