A6795A HP Fibre Channel Tachyon XL2 issue

[Edward J. Duranty_2]

Hi Everoyne,

I currently have an RX5670 running HPUX 11.23 and have installed two "A6795A" HP Fibre Channel Tachyon XL2 cards for connection to an DEll/EMC SAN.

After installing the latest software/drivers and then the two cards; one of the cards does not inintialize, (please see attached document for details of various command checks of cards).

All cables have been verified, pci card slots also. Could I have a bad card or have I missed a setup step?

Thanks!

[Stefan Stechemesser · Accepted solution]

Hi,

did you try cross changing the cables between the two cards ? If the error moves with the cable, it is something outside the card, otherwise it is the card itself.

Best regards

Stefan

[Edward J. Duranty_2]

Hi Stefan,
I sure did, the error stayed with the card. I even removed the working card leaving the one acting up in the server, looking to see if something was setup wrong, but this showed no difference in the card.
Thanks!
Ed