Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

A6795A HP Fibre Channel Tachyon XL2 issue

 
SOLVED
Go to solution

A6795A HP Fibre Channel Tachyon XL2 issue

Hi Everoyne,

I currently have an RX5670 running HPUX 11.23 and have installed two "A6795A" HP Fibre Channel Tachyon XL2 cards for connection to an DEll/EMC SAN.

After installing the latest software/drivers and then the two cards; one of the cards does not inintialize, (please see attached document for details of various command checks of cards).

All cables have been verified, pci card slots also. Could I have a bad card or have I missed a setup step?

Thanks!


2 REPLIES 2
Stefan Stechemesser
Honored Contributor
Solution

Re: A6795A HP Fibre Channel Tachyon XL2 issue

Hi,

did you try cross changing the cables between the two cards ? If the error moves with the cable, it is something outside the card, otherwise it is the card itself.

Best regards

Stefan

Re: A6795A HP Fibre Channel Tachyon XL2 issue

Hi Stefan,
I sure did, the error stayed with the card. I even removed the working card leaving the one acting up in the server, looking to see if something was setup wrong, but this showed no difference in the card.
Thanks!
Ed