Add Bootable DVD option in Partition 1 / Cell 0

[anand_visuvasam]

In RX7640 Server,

We have created Genesis Partition (Partition 0 with Cell 1) and Installed Redhat OS in that partition.

Through nPar in Redhat OS, We have created one more partition (Partition 1 with Cell 0).

When booting Cell 0 (ie partition 1) ,

It Not Showing any bootable Devices (DVD)

Cell 0

========================================================

    LAN [Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(6|0)/Mac(00248124598A)
    LAN [Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(6|1)/Mac(00248124598B)
    EFI Shell
    Boot Option Maintenance Menu

    Use ↑ and ↓ to change option(s). Use Enter to select an option
    Use → and ← to view long descriptions
    Hot Key: 'S' or 's' to start the EFI Shell

When I try to add bootable devices through EFI, It not showing DVD 

Selected boot option: EFI Shell

Loading.: EFI Shell

EFI Shell UEFI version 2.00 [14.62]
Device mapping table

Shell> reconnect -r
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 2.00, firmware 4.03.002)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 2.00, firmware 4.03.002)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 2.00, firmware 4.03.002)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 2.00, firmware 4.03.002)
ReconnectController(0,0,0) : Status = Success

Shell> map -r
Device mapping table

Shell>

Kindly Help to Add DVD option in Partition 1 / Cell 0

[王树强]

Is DVD connected to cell0

[anand_visuvasam]

We have only one DVD,  that can be accessible through Cell 1.

[Matti_Kurkela]

> We have only one DVD,  that can be accessible through Cell 1.

Then you cannot use a DVD to install an OS to Partition 1 / Cell 0, unless you physically move the existing DVD drive to the other slot, or buy a second DVD drive.

[S_Logan]

Hi ,

The DVD Location mapped according to the cell o and c ell 1:

Cell 0 internal DVD Bottom

Cell 1 Internal DVD/ DDS Top

HTH,

S_Logan