Adding a cell from MP menu

[George Chechakunnil]

Hello Admins

I accidently removed a cell from partion 0. after reboot i realised that the primary boot path is now not available. It was part of that cell which was deleted

Server is not booting now. stops at the shell prompt saying boot path not found

how can i add back the cell and fix the issue

thanks in advance

[Torsten.]

Do you have any other partition running?

If you have, you can modify from there.

If not, a possible solution would be to restore the last complex profile.

See the admin guide:

Restoring the Prior
Complex Profile

NOTE: All nPartitions in the complex must be inactive (put in a shutdown for reconfig
state) before restoring a prior complex profile.

Service Processor (MP or GSP): CC command, L option

Note: use the "L" option!

[George Chechakunnil]

The problem was solved by

1. deleting the other cell also
2. creating a new partition with the 2 cells
3 boot the server
4. add the other cell also

thanks a lot

george