Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a cell from MP menu

 
George Chechakunnil
Frequent Advisor

Adding a cell from MP menu

Hello Admins

I accidently removed a cell from partion 0. after reboot i realised that the primary boot path is now not available. It was part of that cell which was deleted

Server is not booting now. stops at the shell prompt saying boot path not found

how can i add back the cell and fix the issue

thanks in advance
I am like a small boy picking up pebbles in god's vast shore of knowledge --- Sir Issac Newton
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Adding a cell from MP menu

Do you have any other partition running?

If you have, you can modify from there.

If not, a possible solution would be to restore the last complex profile.

See the admin guide:

Restoring the Prior
Complex Profile

NOTE: All nPartitions in the complex must be inactive (put in a shutdown for reconfig
state) before restoring a prior complex profile.

Service Processor (MP or GSP): CC command, L option

Note: use the "L" option!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
George Chechakunnil
Frequent Advisor

Re: Adding a cell from MP menu

The problem was solved by

1. deleting the other cell also
2. creating a new partition with the 2 cells
3 boot the server
4. add the other cell also

thanks a lot

george
I am like a small boy picking up pebbles in god's vast shore of knowledge --- Sir Issac Newton