Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding disks to rx7620

 
Mark Gustavson_4
Occasional Advisor

Adding disks to rx7620

I have added two additional 146gb hot pluggable disks to my rx7620. According to the documentation, I must have a second MP IO card to utilize those slots. I have added one.

I still have no power and the PCI power module directly below the disks is off.

All help is greatly appreciated.

Mark
2 REPLIES 2
Sameer_Nirmal
Honored Contributor

Re: Adding disks to rx7620

Hi,

Since the PCI power module is not powering up , there won't be supply available to PCI slots of the cell board ( cell 0 in your case ) . This may happen if the cell board are not locked properly.

Can you provide this info
What you see in
MP - > CM -> du
MP -> CM -> de

Whats the LEDs status on the new MP card installed , BPS ?

How the system is configured? ( 2 hard partitions etc. )


Mark Gustavson_4
Occasional Advisor

Re: Adding disks to rx7620

I needed to add another cell board. Thanks for the help.