HPE Community
Integrity Servers
1752445 Members
6099 Online
108788 Solutions
New Discussion юеВ

Re: After replaced RX2660 server's system board,it can't boot.

 
lei123_1
New Member

тАО04-05-2009 05:58 PM

тАО04-05-2009 05:58 PM

After replaced RX2660 server's system board,it can't boot.

After replaced RX2660 server's system board,it can't boot.
MP log:
Log Entry 13: 08 Oct 1999 08:18:51
Alert Level 3: Warning
Keyword: EFI_SYSID_INVALID
The system ID (UUID) currently in the system is invalid Logged by: System Firmware 0
Data: Status return from PDC function call 0x778002F100E00100 0000000000000000

Pls. help me how to fix it,Thanks!
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО04-05-2009 07:51 PM

тАО04-05-2009 07:51 PM

Re: After replaced RX2660 server's system board,it can't boot.

From EFI shell, please try the following and post the result:

Shell> sysmode service
Shell> sysset

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Kranti Mahmud
Honored Contributor

тАО04-15-2009 02:58 AM

тАО04-15-2009 02:58 AM

Re: After replaced RX2660 server's system board,it can't boot.

Hi lei123,

The SYSID is the "UUID" of the system, a Universal Unique IDentifier used by software vendors for licencing a software to a unique machine.
HP guarantees that the UUID is really unique and cannot be changed by customers
(to prevent duplicate UUIDs etc.).

=> As you replace the system board,you have an invalid UUID,only a HP support engineer can reset it with a special tool.

I think the following thread will help you: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=980533

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.