BL 860c i2 Smart Array P700m

[Clarete Riana]

Hi Pramod,

To configure the internal P410 controller in RAID mode, Download the file BL8x0ci2IOCardFW_manual.tar.gz from the below link and unzip.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=4186428&prodNameId=4204753&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=MTX-a7c00578488a405f9baa359b3e

The tar file has the following files:

SAUPDATE.EFI â This is EFI utility to be used to change the mode of P410i controller.

SAUPDATE.DOC â Describes the procedure to change the mode of P410i controller from HBA mode to RAID mode.

Hope this helps.

[Pramod M]

Dear All,
It was very helpful, and I successfully configured the array (P410i) without removing the P700m.

Closing this thread.

Thanks..

Pramod

[Pramod M]

See above