Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

BL860c i2 show emulex hba's in raid configuration

 
Aamir Majeed
Advisor

BL860c i2 show emulex hba's in raid configuration

Cannot configure drives using drvcfg as it shows emulex HBA's when utility drvcfg is started. Mode has already been changed to RAID....
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: BL860c i2 show emulex hba's in raid configuration

Isn't it what you wanted - the HBA set to RAID mode?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!