cancel
Showing results for 
Search instead for 
Did you mean: 

BMC

 
SOLVED
Go to solution
katie1
Frequent Advisor

BMC



hi how do i connect to the bmc on a rx2600
integrity server , if it does not have the optional mp.

and can i see the server post via the bmc.


regards K1
2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: BMC

The BMC looks like the menu on the C8000 as I told you, you can read some logs there:

cli>help
CLI Commands:
C [] - Change Password
CON - Display Console selection
FPL - Read Forward Progress Log
H - Help (this text)
I - Send any IPMI message
req fmt: rsSA netfnlun chk1 rqSWID rqSeq cmd [data] chk2
resp fmt: rqSWID netfnlun chk3 rsSa rqSeqrsLun cmd ccode [data] chk4
INFO - Display BMC FW Revision
IPMI - Send any IPMI message
req fmt: netfnlun cmd [data]
resp fmt: ccode [data]
LOC [0,1] - Locator LED Control
P [0,1] - Power Control
Q - Quit/Logout
RS [s] - Reset System [and switch to sys console]
SD - Read SDR Repository
SE - Read System Event Log
TOC [s] - Send an INIT/TOC [and switch to sys console]


Connect by pressing esc followed by (

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
katie1
Frequent Advisor

Re: BMC

thanks for the info :)