Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Booting from CD on RX6600

 
SOLVED
Go to solution
Highlighted
Paul Whapshott
Frequent Advisor

Booting from CD on RX6600

Hi,
I have a RX6600 and am trying to boot Windows 64 Bit.

I assume I need an Itanium version cd and not a standard 64bit Windows CD to boot? Is there anything else I need?

Thanks for any help.

Regards,

Paul

 

-------------------------------

P.S. This Thread has been moved from Servers --> General to Servers --> Integrity Servers - Forum Moderator

3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: Booting from CD on RX6600

Similar to a proliant where you boot from a smartstart CD followed by a x86 Win CD,

you need for an Integrity the
SmartSetup CD and an ia64 Win cd.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Whapshott
Frequent Advisor

Re: Booting from CD on RX6600

I have now run the setup cd succesfully on the server. But when I attempt to boot from the installation CD I get the following error;

INF file txtsetup.sif is corrupt or missing, status 4.

Setup cannot continue. Press any key to exit.

The file txtsetup.sif is located in the IA64 directory on the CD.

Any ideas?

Regards,

Paul

Nikola Mrdja
Occasional Advisor

Re: Booting from CD on RX6600