Bus adapter status

[siva3492]

Hello Friends,

Is there any command to know the exact status of Bus adapter.

i tried HP utility 

cstm

 But utility doesn't show any difference even the adapter is unplugged

Please help me .........

Life is like a Temple Run

[Torsten.]

What HP-UX version? What server model? What kind of adapter?

[siva3492]

Thanks for the replay

HP-UX cmcchn B.11.31 U ia64 

Ethernet Gigabit adapter

Life is like a Temple Run

[Torsten.]

How about this?

# nwmgr -g -v -c lan0
lan0:
   Interface State =UP
   MAC Address = 0x00306E123456
   Subsystem = igelan
   Interface Type = 1000Base-T
   Hardware Path = 0/1/2/0
   NMID = 1
   Feature Capabilities = Physical Interface
                          IPV4 Recv CKO
                          IPV4 Send CKO
                          VLAN Tag Offload
                          64Bit MIB Support
                          IPV4 TCP Segmentation Offload
                          UDP Multifrag CKO
   Feature Settings = Physical Interface
                      VLAN Tag Offload
                      64Bit MIB Support
   MTU = 1500
   Speed = 100 Mbps Full Duplex (Autonegotiation : On)

[siva3492]

Hello Torsten,

Thanks for your replay.

Hello Friends,

will you please tell me , is there any command available to know USB device status

Thanks in advance.

Life is like a Temple run...... Don't stop running

[Torsten.]

What kind of USB device do you have in mind (since only keyboard, mouse and DVD drives are supported)?

[S_Logan]

Hi 

you can use "ioscan" command to check the device status.