Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Bus adapter status

 
siva3492
Advisor

Bus adapter status

Hello Friends,

 

Is there any command to know the exact status of Bus adapter.

 

i tried HP utility 

cstm

 But utility doesn't show any difference even the adapter is unplugged

 

Please help me .........

 

 

 

Life is like a Temple Run

6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: Bus adapter status

What HP-UX version? What server model? What kind of adapter?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
siva3492
Advisor

Re: Bus adapter status

Thanks for the replay

 

HP-UX cmcchn B.11.31 U ia64 

 

Ethernet Gigabit adapter

 

 

 

 

 

 

 

 

Life is like a Temple Run

Torsten.
Acclaimed Contributor

Re: Bus adapter status

How about this?

 

# nwmgr -g -v -c lan0
lan0:
   Interface State =UP
   MAC Address = 0x00306E123456
   Subsystem = igelan
   Interface Type = 1000Base-T
   Hardware Path = 0/1/2/0
   NMID = 1
   Feature Capabilities = Physical Interface
                          IPV4 Recv CKO
                          IPV4 Send CKO
                          VLAN Tag Offload
                          64Bit MIB Support
                          IPV4 TCP Segmentation Offload
                          UDP Multifrag CKO
   Feature Settings = Physical Interface
                      VLAN Tag Offload
                      64Bit MIB Support
   MTU = 1500
   Speed = 100 Mbps Full Duplex (Autonegotiation : On)


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
siva3492
Advisor

Re: Bus adapter status

Hello Torsten,

 

Thanks for your replay.

 

Hello Friends,

 

will you please tell me , is there any command available to know USB device status

 

 

 

 

Thanks in advance.

 

 

 

 

Life is like a Temple run...... Don't stop running

Torsten.
Acclaimed Contributor

Re: Bus adapter status

What kind of USB device do you have in mind (since only keyboard, mouse and DVD drives are supported)?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S_Logan
HPE Pro

Re: Bus adapter status

Hi 

 

you can use "ioscan" command to check the device status.

 

I work for HPE

Accept or Kudo