Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Can not see the console on the ILO after booting HPUX.

 
Larry Leone
Advisor

Can not see the console on the ILO after booting HPUX.

We've got a couple rx2600's where I cannot see the console on the ILO after booting HPUX (I see the first part and then when the OS takes over, I stop seeing anything). I can see it on the screen. It's almost like I'm redirecting the console someplace. It appears to be less straightforward than defining the console device in /etc/inittab.
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Can not see the console on the ILO after booting HPUX.

This is normal if the console is set to VGA.

Adjust the config to have the MP serial line as primary console.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Can not see the console on the ILO after booting HPUX.

Forgot to say - adjust this setting from EFI menu.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!